Qvis MINI-PTZ-23X-H User Manual page 17


SHUTTER: Please use the left/right button on the keyboard or in the speed dome terminal menu to set.

IRIS SETTING: Please use the left/right button on the keyboard or in the speed dome terminal menu to set.

EXPOSURE COM: Please use the left/right button on the keyboard or in the speed dome terminal menu to
set.

SLOW AE: In a strongly lit environment, you can lower the camera exposure speed when capturing the
image so you can enhance the definition. Please use the left/right button on the keyboard or in the speed
dome terminal menu to set.

SLOW SHUTTER: In a poorly illuminated environment, you can lower the cameras auto exposure time
when capturing an image and enhance the definition. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set.

NEXT PAGE: This includes: GAIN MAX LIMIT, SLOW SHUTTER LIMIT, NOISE REDUCTION, 3D NOISE
REDUCTION, BLC, WDR, BACK, and EXIT. Move the cursor to the item and then click the left/right button
to set.
o
AUTO GAIN LIMIT: Please click the left/right button to set.
o
SLOW SHUTTER LOW LIMIT: Please click the left/right button to set.
o
NOISE REDUCTION: There may be noise when the camera is monitoring in low illumination
environments. You can use the digital filter to process the noise to guarantee the clear video.
o
3D NOISE REDUCTION: This is to set the speed dome 3D noise reduction setup. Please use
the left/right button on the keyboard or in the speed dome terminal menu to set.
o
BLC: It is an abbreviation for Back Light Compensation. The System can compensate the object
in the dark light to achieve a clear video. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set.
o
WDR ENBALE: It is an abbreviation for wide dynamic region. Please make sure your camera
supports current function. This function can adjust the video brightness when the contrast
between the strong light and the dark light is too high. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
AE RECOVERY: Manually click the "+" and "-"button on the PTZ interface, the system can
o
resume previous exposure value after specified time (The exposure value does not resume if this
function is off.).

BACK: Go back to previous menu.

EXIT: Log out system menu.
2.4.3.3 WDR
Move the cursor to WDR and then click confirm button, you can then go to the submenu.

WDR MODE: Click Left/right button to enable/disable camera WDR function.

BACK: Go back to previous menu.

EXIT: Log out system menu.
：OFF
WDR MODE
BACK EXIT
10