2.4.4.2 Pan
Move the cursor to PAN button and then click confirm button to go to setup interface.
PAN SPEED: Set dome rotation speed. Please use the left/right button on the keyboard or in the speed
dome terminal menu to set.
RUN: Move the cursor to call item and then click confirm button. The dome begins 360 degrees continuous
rotation.
STOP: Highlight stop item and then click confirm button. The dome stops rotation.
BACK: Go back to previous menu.
EXIT: Log out system menu.
2.4.4.3 Scan
Move the cursor to the SCAN button and then click confirm button.
AUTO SCAN NO:This is to set the auto scan number. Please use the left/right button on the keyboard or
in the speed dome terminal menu to set.
SET LEFT LIMIT:This is to set the camera left address. Click confirm button to save current setup.
SET RIGHT LIMIT:This is to set the camera right address. Click confirm button to save current setup.
SCAN SPEED: Please use the left/right button on the keyboard or in the speed dome terminal menu to set.
CALL: Please input auto scan number first, and then please move the cursor to CALL and click confirm
button to activate auto scan function.
STOP: This is to terminate auto scan function.
BACK: Go back to previous menu.
EXIT: Log out system menu.
:5
PAN SPEED
CALL
STOP
BACK
EXIT
AUTO SCAN NO
SET LEFT LIMIT
SET RIGHT LIMIT
SCAN SPEED
CALL
STOP
BACK
EXIT
: 001
:5
14