Function Setting - Qvis MINI-PTZ-23X-H User Manual

2.4.3.6 Next Page
Move the cursor to NEXT PAGE and then click confirm button, you can go to the submenu.

DIGITAL ZOOM: You can use the left/right button to enable/disable the digital zoom function.

PICTURE FLIP: There are two options: on/off. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.

FREEZE FUNCTION: This function allows the system to go from one preset to another preset, without
showing the video during the PTZ movement. There are two options: on/off. Please use the left/right button
on the keyboard or in the speed dome terminal menu to set.

CAMERA FACTORY DEFAULT SETTING: Move the cursor to current item and then click confirm button to
restore factory default setup.

CAMERA RESTART: Move the cursor to current item and then click confirm button to reboot the camera.

BACK: Go back to previous menu.

EXIT: Log out system menu.

2.4.4 Function Setting

Please go back to main menu and move the cursor to FUNCTION SETTING, click confirm button. You can see
the above interface.

PRESET: Move the cursor to PRESET and then click confirm button to go to the third submenu.

AUTO PAN: Move the cursor to AUTO PAN and then click confirm button to go to the third submenu.

AUTO SCAN: Move the cursor to SCAN and then click confirm button to go to the third submenu.

TOUR: Move the cursor to AUTO TOUR and then click confirm button to go to the third submenu.

PATTERN: Move the cursor to PATTERN and then click confirm button to go to the third submenu.

IDLE FUNCTION: Move the cursor to IDLE FUNCITON and then click confirm button to go to the third
submenu.
DIGITAL ZOOM
PICTURE FLIP
FREEZE FUNC
CAMERA FACTORY DEFAULT
CAMERA RESTART
BACK
PRESET
AUTO PAN
AUTO SCAN
TOUR
PATTERN
IDLE MOTION
NEXT PAGE
BACK EXIT
： OFF
：OFF
： OFF
EXIT
12