Operation On The 60-Meter Band (U.s. Version) - Yaesu FTDX9000D Operation Manual

O
PERATION ON THE
The recently-released 60-meter band is covered, in the FT
channels are set to USB, and they appear between the "last" PMS channel ("P9U") and the first "regular" memnory channel
(Channel 1).
The five channels are:
Channel Number
US1
US2
US3
US4
US5
To operate on the 60-meter band channels, press the V/
M key, if necessary, to enter the Memory mode, then ro-
tate CLAR/VFO-B knob to select the desired channel
from the above selections.
Be sure to observe all current regulations regarding Effec-
tive Radiated Power (E.R.P.) while operating on the 60-
meter band.
FT 9000D O
DX PERATION
Frequency
5.332.000 MHz
5.348.000 MHz
5.368.000 MHz
5.373.000 MHz
5.405.000 MHz
M
ANUAL
60-M B
ETER
9000D, by five special, fixed memory channels. These
AND (U.S. V
ERSION
V/M switch
CLAR/VFO-B knob
Page 119
)