Lock; Dim; B-Disp Off - Yaesu FTDX9000D Operation Manual

B O
ASIC PERATION
You may lock the setting of the Main Tuning Dial, to prevent accidental frequency change.
To lock out the Main Tuning Dial, just press the LOCK
switch that is located to the right of the Dial. To unlock the
Dial setting, and restore normal tuning, just press the
LOCK switch once more.
The illumination level of the analog meters, main frequency display, and the TFT may be reduced, if you are using the
transceiver in a dark environment where high brightness is not desired.
To reduce the illumination level, press the DIM switch,
located to the left of the leftmost analog meter. To restore
full brightness, press the DIM switch once more.
You may also customize the amount of brightness reduc-
tion engaged by the pressing of the DIM switch, and
may use different brightness levels for different front panel
areas. Menu item "DISPLAY 14 DIMMER-METER" ad-
justs the brightness level of the analog meters, while menu
item "DISPLAY 15 DIMMER-VFD" sets the brightness
levels of the main frequency display and the TFT (these
settings are effective only when the DIM switch is
pressed).
During monoband operation, you may wish to disable (temporarily) the display of the Sub (VFO-B) band frequency.
To do this, press the B-DISP OFF switch, fond at the
lower left side of the CLAR/VFO-B knob.
Press the B-DISP OFF switch once more to restore the
Sub (VFO-B) band frequency display.
FT 9000D O
DX PERATION
: R
ECEIVING ON

LOCK

DIM

B-DISP OFF

M
ANUAL
A
MATEUR
DIM switch
B
ANDS
LOCK switch
B-DISP OFF switch
Page 47