Operation On 60-Meter ( 5 Mhz ) Band; ( U.s. And U.k. Version Only ) - Yaesu FT-991A Operating Manual

Basic Operation: Receiving on Amateur Bands

Operation on 60-Meter ( 5 MHz ) Band

The recently-released 60-meter band is covered, in the FT-991A, by fixed memory channels. These channels are set to
USB or CW, and they appear between the "last" PMS channel ( "P9U" ) and the first "regular" memory channel ( Channel
1 ) :
1. Press the V/M button once to enter the "Memory"
mode; the "MEM" icon will appear in the display.
2. Touch [ MCH ] on the screen displayed by pressing
the F ( M-LIST ) button. The "MCH" notation and a
memory channel number will appear on the display
to signify that rotation of the MULTI knob will allow
selection of the memory channel.
3. Memory channels ( "5-01" through "5-10" ) are
pre-programmed, at the factory, with the permitted
frequencies in the 5 MHz band, and the USB or CW
mode is automatically selected on these channels.
4. To exit from 60-meter operation and return to the
VFO mode, just press the V/M button.
Note:
The frequencies and operating mode for 5 MHz band
operation are fixed, and may not be changed.
FT- 991 Operating Manual

( U.S. and U.K. version only )

Main Tuning Dial Knob
Channel
Number U.S. Version
5.332000 MHz ( SSB )
5-01
5.348000 MHz ( SSB )
5-02
5.358500 MHz ( SSB )
5-03
5.373000 MHz ( SSB )
5-04
5.405000 MHz ( SSB )
5-05
5.332000 MHz ( CW )
5-06
5.348000 MHz ( CW )
5-07
5.358500 MHz ( CW )
5-08
5.373000 MHz ( CW )
5-09
5.405000 MHz ( CW )
5-10
CLAR/VFO-B Knob
V/M Button
Frequency
U.K. Version
5.260000 MHz ( SSB )
5.280000 MHz ( SSB )
5.290000 MHz ( SSB )
5.368000 MHz ( SSB )
5.373000 MHz ( SSB )
5.400000 MHz ( SSB )
5.405000 MHz ( SSB )
-
-
-
Page 35