Yaesu FTDX9000D Operation Manual page 142

M M
ENU ODE
078. MAIN-CONTOUR-LEVEL
Function: Adjusts the parametric equalizer gain of
the main band (VFO-A) receiver Contour filter.
Available Values: –20 ~ +10 dB
Default Setting: –15 dB
079. MAIN-CONTOUR-WIDTH
Function: Adjusts the Q-factor of the main band
(VFO-A) receiver Contour filter.
Available Values: 1 - 11
Default Setting: 10
080.SUB-CONTOUR-LEVEL
Function: Adjusts the parametric equalizer gain of
the sub band (VFO-B) receiver Contour filter.
Available Values: –20 ~ +10 dB
Default Setting: –15 dB
081. SUB-CONTOUR-WIDTH
Function: Adjusts the Q-factor of the sub band (VFO-
B) receiver Contour filter.
Available Values: 1 ~ 11
Default Setting: 10
082. IF-NOTCH-WIDTH
Function: Selects the bandwidth of the DSP NOTCH
filter
Available Values: NARROW/WIDE
Default Setting: WIDE
"Q"
IF
BANDWIDTH
CONTOUR "G
Page 140
RX DSP G
"+" Gain
" -- " Gain
" "Q"
AIN AND
ROUP
083. MAIN-CW-SHAPE
Function: Selects the passband characteristics of
the main band (VFO-A) DSP filter for the CW mode.
Available Values: SOFT/SHARP
Default Setting: SHARP
SOFT: Primary importance attached to amplitude
of the filter factor.
SHARP: Primary importance attached to phase of the
filter factor.
084. MAIN-CW-SLOPE
Function: Selects the shape factor of the main band
(VFO-A) DSP filter for the CW mode.
Available Values: GENTLE/MEDIUM/STEEP
Default Setting: MEDIUM
085. MAIN-CW-NARROW
Function: Selects the passband of the main band
(VFO-A) DSP filter for the CW "narrow" mode.
Available Values: 25/50/100/200/300/400 Hz
Default Setting: 300 Hz
086. MAIN-PSK-SHAPE
Function: Selects the passband characteristics of
the main band (VFO-A) DSP filter for the PSK mode.
Available Values: SOFT/SHARP
Default Setting: SHARP
SOFT: Primary importance attached to amplitude
of the filter factor.
SHARP: Primary importance attached to phase of the
filter factor.
087. MAIN-PSK-SLOPE
Function: Selects the shape factor of the main band
(VFO-A) DSP filter for the PSK mode.
Available Values: GENTLE/MEDIUM/STEEP
Default Setting: MEDIUM
088. MAIN-PSK-NARROW
Function: Selects the passband of the main band
(VFO-A) DSP filter for the PSK "narrow" mode.
Available Values: 25/50/100/200/300/400 Hz
Default Setting: 300 Hz
089. MAIN-RTTY-SHAPE
Function: Selects the passband characteristics of
the main band (VFO-A) DSP filter for the RTTY mode.
Available Values: SOFT/SHARP
Default Setting: SHARP
SOFT: Primary importance attached to amplitude
of the filter factor.
SHARP: Primary importance attached to phase of the
filter factor.
FT 9000D O
DX
M
PERATION ANUAL