Yaesu FTDX9000D Operation Manual page 137

MODE-AM G
039. AM MIC GAIN
Function: Sets the microphone gain for the AM mode.
Available Values: MCVR/0 ~ 255 (FIX)
Default Setting: 160
When this menu is set to "MCVR," you may adjust
the microphone gain using the front panel's MIC knob.
040. AM MIC SELECT
Function: Selects the microphone to be used on the
AM mode.
Available Values: FRONT/REAR/DATA/PC
Default Setting: FRONT
FRONT: Selects the microphone connected to the
front panel's MIC jack while using the AM
mode.
REAR: Selects the microphone connected to the
rear panel's MIC jack while using the AM
mode.
DATA: Selects the microphone connected to pin 1
of the PACKET Jack while using the AM
mode.
PC: Selects the microphone connected to the
rear panel's AUDIO IN 3.5-mm jack while
using the AM mode.
FT 9000D O
DX PERATION
ROUP
M
ANUAL
M
MODE-CW G
041. F-KEYER TYPE
Function: Selects the desired keyer operation mode
for the device connected to the front panel's KEY jack.
Available Values: OFF/BUG/ELEKEY/ACS
Default Setting: ELEKEY
OFF: Disables the front panel's keyer ("straight
key" mode for use with external keyer or
computer-driven keying interface).
BUG: Mechanical "bug" keyer emulation. One
paddle produces "dits" automatically, while
the other paddle manually produces "dahs."
ELEKEY: Iambic keyer with ACS (Automatic Char-
acter Spacing) disabled.
ACS: Iambic keyer with ACS (Automatic Char-
acter Spacing) enabled.
042. F-CW KEYER
Function: Selects the keyer paddle's wiring configu-
ration of the KEY jack on the front panel.
Available Values: NOR/REV
Default Setting: NOR
NOR: Tip = Dot, Ring = Dash, Shaft = Ground
REV: Tip = Dash, Ring = Dot, Shaft = Ground
043. R-KEYER TYPE
Function: Select the desired keyer operation mode
for the device connected to the rear panel's KEY jack.
Available Values: OFF/BUG/ELEKEY/ACS
Default Setting: ELEKEY
OFF: Disables the front panel's keyer ("straight
key" mode for use with external keyer or
computer-driven keying interface).
BUG: Mechanical "bug" keyer emulation. One
paddle produces "dits" automatically, while
the other paddle manually produces "dahs."
ELEKEY: Iambic keyer with ACS (Automatic Char-
acter Spacing) disabled.
ACS: Iambic keyer with ACS (Automatic Char-
acter Spacing) enabled.
044. R-CW KEYER
Function: Selects the keyer paddle's wiring configu-
ration of the KEY jack on the rear panel.
Available Values: NOR/REV
Default Setting: NOR
NOR: Tip = Dot, Ring = Dash, Shaft = Ground
REV: Tip = Dash, Ring = Dot, Shaft = Ground
M
ENU ODE
ROUP
Page 135