Operating The Scanner; Power Up Procedure; Document Positioning - Mustek 600 CP User Manual

Operating the Scanner

Configuring the Software
In order to scan with TWAIN Data Source, you must first configure
the TWAIN-compliant application software that came with your
scanner or which was purchased separately. Configuration involves
setting up the application software as a "host" program for TWAIN
Data Source and selecting the scanner as an image source for the
application software.
The configuration process only has to be done once. After the
configuration process is complete, the TWAIN Data Source will
control all interactions between your scanner and the host
program. To configure the software:
1. Make sure your scanner is still on.
2. Launch Windows.
3. Launch the host application software that came with the
scanner.
4. Open the host application's Select Source command (usually
under the File menu) and choose Select Source to display the
Select Source dialog box.
5. From the list of sources, choose "F/B Scanner (EPP)" as your
image source and click Select. You will return to the main
screen of the host application. Software configuration is now
complete.

Power Up Procedure

1. Power on the computer and wait for it to finish booting.
2. Power on the scanner by flipping the power switch from to |.
When turned on, the scanner undergoes a series of self-
diagnostic tests. The LED indicator on the front panel of the
scanner flashes briefly and then remains lit, signifying that the
scanner is ready.

Document Positioning

For the best possible image scans, it is important that you position
your documents correctly and carefully.
1. Lift the document cover.
UK
Installation UK-7