Unpacking The Stove; Installing The Stove; Installing Your Morsø Stove - Morso S12 series Instructions For Installation And Use Manual

1.0 Installing your Morsø stove

1.1 Unpacking the stove

The Morsø S12 weigh 115 kg. The Morsø S10-45 weigh 140 kg. In order to avoid damage when
unpacking and assembling the stove, we recommend that this job be undertaken by 2 people.

1.2 Installing the stove

The stove is from the factory fitted with a top flue exit. National and local regulations regarding
the installation of wood-burning stoves must be observed, as must local regulations regarding
chimney connections and chimney installation. You may want to ask your chimney sweep for
advice. However, you, your technical adviser or workman are responsible for complying with
the applicable national and local regulations.
1.3 Chimney sweep
As stated, it may be wise to consult your local chimney sweep before installing the stove.
In any event, the chimney sweep must be notified once the wood-burning stove has been
installed. The chimney sweep will inspect the installation and schedule sweeping intervals
with you. If your chimney has not been used for some time, it should be inspected for cracks,
bird nests, etc., before it is used.
1.4 location of the stove/distance requirements
Distance requirements apply only if the stove is placed near flammable materials. Your new
stove can be positioned as specified on the certificate of approval on the back of the stove if the
walls are made of flammable material.
Minimum distances from flammable material:
Installation Type of stove
Normal
Parallel uninsulated pipe
Normal
Parallel insulated pipe
Corner
installation uninsulated pipe
* With double glass in front
Distance A
Morsø S12 125 mm.
Morsø S12 100 mm.
Morsø S12
Distance B
300 mm.
(200 mm.*)
300 mm.
(200 mm.*)
- -
Distance C
-
-
175 mm.
19