Morso S12 series Instructions For Installation And Use Manual page 30

Removing/installing vermiculite parts (brick panel, rar brick and baffle plates)
Removal of firebox parts
Vermiculite should only be removed/installed when the stove is cold
1. Start by emptying the cold stove of ash.
2. The front vermiculite plate is removed. Next the two lower baffle plates are lifted a bit so that
the sidebricks can be removed. The lower baffle plates can now be removed. Finally the upper
baffle plate made of steel is lifted from the two supporting bolts and removed.
Installation of firebox parts.
Install the parts in reverse order of removal.
Additional accessories
We offer a comprehensive line of chimney, floor plate and accessory products that can
facilitate the daily operation and maintenance of your Morsø stove.
30
Spare parts for the S12
Description
Package rope for door
Cast grate
Vermiculite baffle
Glass inside door
Glass outside door
Glass lower door
Vermiculite left side brick panel
Vermiculite right side brick panel
Vermiculite oblique rear brick
Vermiculite rear brick
Product no.
62904500
34120300
57121200
57121800
57122100
57123400
57121500
57121600
57121100
57120800