Installing Your Morsø Stove; Unpacking The Stove - Morso 2B Standard Instructions For Installation And Use Manual

1.0 Installing your Morsø stove

1.1 Unpacking the stove

2B Standard: After removing the outer packaging, flatten it
and lay onto the floor close to the stove; this can then act
as protective work surface during the assembly process.
Next, remove the legs and bolts from inside the stove.
Gently lay the stove onto its back and unscrew it from the
wooden pallet. Using the bolts supplied, now screw the
legs into position on the underside of the base. The stove
should now be lifted and moved into the upright position,
avoiding excess load on the back legs.
Positioning the Baffle
Locate the front access baffle (1) as per drawing and care-
fully place the insulation pad (2) above the cast baffle as-
sembly.
Before lighting the stove it is important to ensure the cor-
rect location of the front baffle and that the insulation pad
covers the entire baffle assembly.
19