Morso S12 series Instructions For Installation And Use Manual page 21

1.6 Connecting the flue pipe
The flue collar can be rotated and be used for ø150 (inside and outside the flue collar) and
ø130 connections.
Mounting the flue collar pointing upwards
From the factory, the stove is prepared for installation with the flue collar provided (1) point-
ing upwards.
Mounting the flue collar to the rear
Lift the top panel from the stove.
With a hammer use light, firm taps to knock out the
iron piece on the convection back panel from the small
"bridges" holding the piece in place.
The cover plate for the smoke outlet is unscrewed from
the back panel and the fixed onto the top panel.
Mount the flue collar onto the back panel
Lift the top panel back into place and the round section
which is provided can be placed in the top panel and
cover for the blocked off smoke outlet.
The location of the baffles
The baffles (2), (3) and (4) are mounted on delivery.
Make sure that the baffles are correctly assembled be-
fore lighting the stove (please see the sketch).
The upper baffle plate made of steel is mounted on two
bolts.
21