Installing Your Morsø Stove; Unpacking The Stove; Installing The Stove - Morso 8100 Instruction Manual

1.0 Installing your Morsø stove

1.1 Unpacking the stove

The Morsø 8100 stoves weigh between 150 and 260 kg. In order to avoid damage when unpack-
ing and assembling the stove, we recommend that this job be undertaken by 2 people. Remove
the top cover, which is lying loose, before lifting the combustion chamber off the wooden pal-
let. Place the stove carefully in position, centrally on the base plate.

1.2 Installing the stove

National and local regulations regarding the installation of wood-burning stoves must be ob-
served, as must local regulations regarding chimney connections and chimney installation.
You may want to ask your chimney sweep for advice. However, it is you, your technical adviser
or workman, who is responsible for compliance with the applicable national and local regula-
tions.
1.3 Chimney sweep
As stated, it may be wise to consult your local chimney sweep before installing the stove. In
any event, the chimney sweep must be notified once the wood-burning stove has been in-
stalled. The chimney sweep will inspect the installation, and reach an agreement with you
regarding sweeping intervals. If your chimney has not been used for some time, it should be
inspected for cracks, bird nests, etc., before it is used.
1.4 location of the stove/distance requirements
Distance requirements apply only if the stove is placed near flammable materials. Your new
stove can be positioned as specified on the authorisation sign on the back of the stove if the
walls are made of flammable material.
Minimum distances from flammable material:
Type of stove
Morsø 8100
uninsulated flue pipe
Morsø 8100
rotatable base
uninsulated flue pipe
Behind the stove (A)
150 mm
1100 mm
Without side glass
To the sides of the stove (B)
500 mm
1100 mm
With side glass
To furniture
1100 mm
1100 mm
21