TFA WIRELESS 433 MHz TEMPERATURE STATION Instruction Manual page 38

After batteries are re-inserted, the station will automatically launch the learn mode. The signal receipt
indicator will be displayed. User needs to set again the temperature station for the desired application.
(See "SETTING UP" in previous clause)
Note:
If the battery level is low, the digits "No EPr" may be displayed on LCD after resetting, indicating that
•
the power is too low for the temperature station to function normally. In this case, the batteries shall
be replaced.
User is recommended to upload and save all the useful data to PC (if possible) before performing
•
the factory reset.
USING THE TEMPERATURE STATION WITH PC
With the aid of the software supplied, the temperature station may provide the following additional
functions to user.
1. Importing data from temperature station to PC
2. Printing the history file
Procedures to install the software to PC and application of the software are described in the user manual
of the PC software.
ABOUT THE OUTDOOR TRANSMITTER (PURCHASED SEPARATELY)
The range of the temperature transmitter may be affected by the temperature. At cold temperatures the
transmitting distance may be decreased. Please bear this in mind when positioning the transmitters. Also
the batteries may be reduced in power for the outdoor transmitter.
85