Table of Contents
Advertisement
5.
Press OK key to return to the normal display.
Note:
•
The alarm allow user to set individually the high or low threshold upon his requirements. For
example, the user can set the thresholds for temperature to 35°C (high) and 25°C (low), while only
activating high temp alarm and deactivating low temp alarm. In this case, the alarm will not trigger
when temp. is lower than 25°C yet will trigger when temp is higher than 35.0°C.
•
When the temperature or humidity is sensed to be out of the pre-set threshold value, the alarm will
sound and the alarm icon will be present on LCD. User may press any key to stop the buzzer. If no
key is pressed, the buzzer will beep for two minutes yet the alarm signal icon will still be flashing
until the temperature or humidity is within the pre-set range again.
•
Once an alarm is triggered, the display switches to the latest triggered channel. In addition, the high/
low limit icon and IN/ OUT icon is flashing as long as the alarm condition is met.
•
If an alarm is triggered, the alarm icon will be flashing until the temperature and humidity is back to
the conditions within the preset threshold values.
Alarm signal icon
appears as the
current temperature
or humidity is out of
the pre-set
threshold value
81
Advertisement
Table of Contents
