Table of Contents
Advertisement
TIME RECEPTION ON/OFF SETTING:
In area where reception of the DCF time is not possible, the DCF time reception function can be turned
OFF. The clock will then work as a normal Quartz clock. (Default setting is ON).
1.
Press and hold the OK key until the digits "Lcd" starts flashing.
2.
Press and release the OK key three times to enter the time reception time setting. The digit "rEc"
will be flashing.
3.
Use the Plus and Minus key to set the time reception function to on or off mode.
4.
Press the Mode or Alarm key to confirm and go back to the normal display mode.
Note:
If the Time Reception function is turn OFF manually, the clock will not attempt any reception of the DCF
time as long as the Time Reception OFF function is activated. The time reception icon and the "DCF" icon
will not be displayed on the LCD
Digits flashing
62
Advertisement
Table of Contents
