Time Zone Setting - TFA WIRELESS 433 MHz TEMPERATURE STATION Instruction Manual

The LCD contrast can be set within 8 levels, from LCD 0 to LCD7 (Default setting is "LCD 5"):
1. In normal display, press and hold the OK ( ) key until the digits "Lcd" starts flashing.
2. Use the Plus (+) and Minus (–) key to view all levels of contrast.
3. Select the desired LCD contrast. Confirm with the mode or Alarm (al) key to go back to the normal
display mode.

TIME ZONE SETTING:

The time zone default of the temperature station is "0". To set a different time zone:
1. Press and hold the OK key until the digits "Lcd" starts flashing.
2. Press shortly the OK key one more time to enter the time zone setting. The digits "Zo" will be
flashing.
3. Use the Plus and Minus key to set the time zone (-12 to 12 hr).
4. Press the Mode or Alarm key to confirm and go back to the normal display mode.
Digits flashing
60