Table of Contents
Advertisement
Hour flashing
Minutes flashing
1.
Press and hold the OK key until the digits "Lcd" starts flashing.
2.
Press and release the OK key five times to enter the hour setting. The hour digit in the time LCD
will be flashing.
3.
Use the Plus and Minus key to set the hour.
4.
Press the OK key one more time to confirm the hour and advance to the minute setting. The
minute digit will be flashing.
5.
Use the Plus and Minus key to set the minute
6.
Press the Mode or Alarm key to confirm and go back to the normal display mode.
Note:
The unit will still try and receive the signal every day despite it being manually set. When it does
receive the signal, it will change the manually set time into the received time. During reception attempts the
DCF tower icon will flash. If reception has been unsuccessful, then the DCF tower icon will not appear but
reception will still be attempted the following hour.
64
Advertisement
Table of Contents
