Table of Contents
Advertisement
i.
Recording intervals to memory (hr:min)
j.
Re-learning/ Removing channels
k.
Number of channels to be saved to memory
•
In view mode or alarm mode, press to go back to normal display mode
Plus (+) and Minus (–) key
•
In normal display mode, press to select a channel (the indoor sensor or one of the outdoor
transmitters)
Press to make adjustment (increase or decrease) in different manual settings and alarm setting
•
Mode key (mode)
•
In normal display mode, press to toggle between the following view mode:
a.
Maximum record of a selected channel (the indoor sensor or one of the outdoor
transmitters, depending on the user's selection)
b.
Minimum record of a selected channel
c.
Average humidity and temperature readings of a selected channel (over the last 100
values stored in memory)
d.
The dew point temperature of a selected channel
e.
History readings in the memory of a selected channel
f.
Calibration mode of humidity and temperature of a selected channel
•
In alarm setting mode, press to activate/ deactivate the temperature and humidity alarm.
In manual setting mode, press to go back to normal display mode
•
•
Press and hold for 3 seconds to reset Min/ Max record of a particular channel
Press and hold for 5 seconds to reset Min/ Max record of all channels
•
Alarm key (al)
Press and hold for 3 seconds to enter the alarm setting mode.
•
57
Advertisement
Table of Contents
