Manual Time Setting - TFA WIRELESS 433 MHz TEMPERATURE STATION Instruction Manual

12/24-HOUR FORMAT SETTING:
The time display can be selected to show hours in 12-hour or 24-hour settings. (Default 24-Hour)
1. Press and hold the OK key until the digits "Lcd" starts flashing.
2. Press and release the OK key four times to enter the time format setting. The digit "24h" will be
flashing.
3. Use the Plus and Minus key to set the time shown in 12-hour or 24-hour format.
4. Press the Mode or Alarm key to confirm and go back to the normal display mode.

MANUAL TIME SETTING:

In case the temperature station cannot detect the DCF-signal (for example due to disturbances,
transmitting distance, etc.), the time can be manually set. The clock will then work as a normal Quartz
clock.
Digits flashing
63