TFA WIRELESS 433 MHz TEMPERATURE STATION Instruction Manual page 31

Calibration icon flashing
4. Press the Plus or Minus key to set the desired correction for the humidity reading. Then press the
Alarm key to exit.
ALARM PROGRAMMING FOR INDOOR/OUTDOOR TEMPERATURE AND HUMIDITY
The temperature station will allow users to set a range of specific alarms to meet specific temperature and
humidity conditions set by the user.
For example, user may set the high and low temperature alarm point at 20 and 30 °C respectively. Then
the alarm will sound once the temperature is higher than 30.0 or lower than 20.0 °C.
To set the high humidity alarm:
1. In normal display, press the Plus or Minus key to select a channel (the sensor at the temperature
station or one of the outdoor transmitters)
Temperature correction
flashing
78