Setting The Temperature; Set The Number Of Bursts Of Steam; When To Add The Steam - Miele H6860BP Operating And Installation Instructions

Setting the temperature

^ Set the required temperature.
^ Touch "OK".

Set the number of bursts of steam

If you wish the burst of steam to be
injected into the oven automatically
after the heating-up phase:
^ Touch Automatic burst of steam
If you wish to inject one or more bursts
of steam manually at specific times:
^ Touch "1 burst of steam", "2 bursts of
steam" or "3 bursts of steam".
Moisture plus d

When to add the steam

This option will only appear in the
display after you have selected 1, 2
or 3 bursts of steam.
Tip: If you have selected more than one
burst of steam, the 2nd one should be
released at least 10 minutes after
starting the programme.
– Manual steam
If you want to inject the bursts of steam
manually:
^ Touch "Manual steam".
Then set the minute minder N to
remind you when to release them.
– Time-controlled steam
If you want to time when to release the
bursts of steam:
^ Touch "Time-controlled steam".
^ Set the time for each burst of steam.
The oven will then release the steam
at the specified times. The time
counts down as soon as the
programme is started.
^ Touch "OK".
The prompt to draw in water then
appears.
67