Remote Panel .Connection - Sensata SSI-12HF3.5N Owner's Manual

SSI Series Owners Manual
3-4
ON / OFF / REMOTE Switch Installation
3-4-1-1. Before installing the inverter, make sure the main switch must be "OFF".
3-4-1-2. Before using the remote unit, make sure the main switch must
3-4-1-3. Ensure the remote control contact is off.
3-4-1-4. Remote Port： Place 0.75mm
3-4-1-5. Remote port ON/OFF inverter setup status
REMOTE".
the panel.
NOTE: Only one of control mode can be presented. When operating.
http://dimensions.sensata.com
2
and Screw type cable between the remote port and
be "
MODE Ⅰ
MODE Ⅳ
Page 9