Introduction; Features; Nomenclature - Sensata SSI-12HF3.5N Owner's Manual

SSI Series Owners Manual

2. Introduction

2-1 Features

Pure sine output wave with advanced microprocessor control.
• GFCI (Ground Fault Circuit Interrupter) / NEMA5-15R receptacle.
• Optional remote control connection for power ON/OFF button.
• Output frequency 50/60 Hz switch selectable.
• Load control cooling fan.
• LED indication for input, output level & failure status.
• Input polarity reverse, short circuit, under voltage and over voltage protection.
• Output short circuit, overload, over temperature protection.
• Automatic low battery shutdown at 10.5 VDC (with in-rush delay)
Approvals: FCC Class A approved.
2-2

Nomenclature

SSI - 12 - HF 3.5 N
http://dimensions.sensata.com
Three letter suffix designation
Base model
Pure sine signal output
Wattage output: 3.5 = 350
HF: High frequency inverter
Input voltage: 12 = 12VDC
SSI: Sensata Series Inverters
Page 4