Troubleshooting Guide - Sensata SSI-12HF3.5N Owner's Manual

SSI Series Owners Manual
Troubleshooting
Problems / Symptoms
There is no AC power output, and the
status indicator LED is :
a. RED, blinking fast
b. RED, blinking slowly
c. RED, blinking intermittently
d. RED, solid ON
WARNING!
Do not open or disassemble the inverter. Attempting to service
the unit yourself may cause the risk of electrical shock or fire.
Possible Cause
Over input voltage (OVP)
Low input voltage (UVP)
Over Temperature (OTP)
Short circuit, overload or wiring
error (OLP)
http://dimensions.sensata.com
Solutions
Check the input voltage, reduce input
voltage
Recharge the battery, check
connections and the cable
Improve ventilation, make sure
inverter vents are not obstructed,
lower ambient temperature
Check AC wiring for short circuit,
reduce the load
Page 14