System Utilities - D-Link DES-3225G Series User Manual

After making your changes in the fields above, press RESET SWITCH TO START UPDATE to initiate the
update sequence.
The fields you can set are:
♦ TFTP Server Address The IP address of the TFTP server where the runtime (switching software) or
configuration file is located. This entry is used only if the Firmware Update is set to Enabled.
♦ Firmware Update Determines whether or not the Switch will try to look for a runtime image file on
the TFTP server.
♦ File Name The complete path and filename of the runtime image file on your TFTP server to be
uploaded to the switch.
♦ Use Configuration File Toggle to Enabled to use the settings in a configuration text file when the
switch is reset (rebooted). The configuration file is explained in detail in the Sample Configuration File
Appendix.
♦ Config File Name The complete path and filename on the TFTP server for configuration file to be
used.

System Utilities

The Utilities menu offers three system utility options, Ping Test, Save Settings to TFTP Server, and
Save Switch History to TFTP Server. The following window will be opened:
86
Figure 6-47. Update Firmware and Configuration Files screen
24-port NWay Ethernet Switch User's Guide
Using the Console Interface