D-Link DES-3225G Series User Manual page 117

24-port NWay Ethernet Switch User's Guide
Static Multicast Forwarding
Figure 7-11. Static Multicast Settings window
This function forwards traffic over each port for one multicast group. You can configure each port on the
Switch to forward traffic for the specified multicast group. Please note that when a mode other than IEEE
802.1Q VLANs is selected, the window above will change from Static Multicast Settings to Static Multicast
Forwarding Table and will contain two columns of information, MAC Address and Status.
Click the pointer icon on the right side of the table to access either the Configure IEEE 802.1Q VLANs
Entry window (if the current mode is either MAC-based Broadcast Domains, Port-based VLAN, or None)
or the Configure Static Multicast Entry window (if the current mode is IEEE 802.1Q VLANs) shown
below:
Web-Based Network Management 117