D-Link DES-3225G Series User Manual page 118

To Add/Modify to the table or Delete from the table, check the desired option button, enter the VLAN ID
in the V-Id field, enter the MAC address in the MAC Address field, select None, Egress, or Forbidden for
each port, and select a State, Permanent, Invalid, Delete on Reset, or Delete on Timeout. Click Apply to let the
changes take effect.
The information above is described as follows:
♦ Add/Modify to the table Allows you to create or edit a filter for the Static Multicast Forwarding
Table which will either forward or block multicast traffic.
♦ Delete from the table Allows you to delete a filter from the Static Multicast Forwarding Table.
♦ V-Id This is the VLAN that will be defined on this screen. Note a VLAN ID is from 1 to 4094.
♦ MAC Address The Ethernet address of the Static Multicast Forwarding Table entry. Only valid
Multicast addresses will be added to the table.
♦ State Choose how you want the Switch to deal with the newly-created Static Multicast Forwarding
table entry: Delete on Reset, Delete on Timeout, Invalid, or Permanent.
118
Figure 7-12a. Configure Static Multicast Entry window
24-port NWay Ethernet Switch User's Guide
Web-Based Network Management