D-Link DES-3225G Series User Manual page 130

24-port NWay Ethernet Switch User's Guide
Figure 7-22. Configure IEEE 802.1Q VLANs Entry window
To configure an 802.1Q VLAN entry, check the desired option in the first two lines of the window above and
enter a V-Id number and Description. Next, either check the Untag option, or leave it unchecked for each
member port you wish to be a Tagging port. In the bottom three lines, None should be checked if you don't
want a port to belong to the VLAN. Otherwise, check Egress to statically set a port to belong to a VLAN or
check Forbidden if you wish to forbid the port from dynamically belonging to the VLAN. Click Apply to let the
changes take effect.
130 Web-Based Network Management