Control Throw Deflection Table - AeroWorks Sport Cub S2 ARF-QB Assembly Manual

7. Secure the tabs to the fin using scotch tape.
8. Degrees are measured at the tip of the boost tab
as shown below.

Control Throw Deflection Table

Low Rate
Aileron 7/8" or 20˚ up
7/8" or 20˚ down
Rudder N/A" or 25˚ left
N/A" or 25˚ right
Elevator 1 1/8" or 17˚ up
1 1/8" or 17˚ down 1 3/4" or 27˚ down
Flap 7/8" or 20˚ down 1 1/4" or 30˚ down
High Rate
Aileron 1 3/4" or 40˚ up
1 3/4" or 40˚ down
Rudder N/A" or 45˚ left
N/A" or 45˚ right
Elevator 2 1/2" or 40˚ up
2 1/2" or 40˚ down
Flap 1 3/4" or 40˚ down
Recommended Exponential
15% Exponential on low rates
30% Exponential on medium rates
60% Exponential on high rates
Use the given rates as a starting point. You can
adjust from there to suit your own flying
84
Medium Rate
1 1/4" or 30˚ up
1 1/4" or 30˚ down
N/A" or 35˚ left
N/A" or 35˚ right
1 3/4" or 27˚ up
style.