Hardware
:
•
50cc Gas engine and ignition
•
J-Tec 50cc Wrap Around Slim Fit Muffler
•
2 x aileron servos (min 172 in./oz. Torque @ 6
volt, Digital, Metal Geared)
•
2 x flap servos (min 172 in./oz. Torque @ 6 volt,
Digital, Metal Geared)
•
1 x rudder servo (min 172 in./oz. Torque @ 6
volt, Digital, Metal Geared)
•
2 x elevator servos (min 172 in./oz. Torque @ 6
volt, Digital, Metal Geared)
•
1 x throttle servo (Fast / Reliable)
•
Servo extensions 2 x 6", 4 x 18," 2 x 24"
•
1 x 8 channel receiver (2.4Ghz recommended)
•
1 x receiver battery (7.4 volt/ 5200mah)
•
1 x ignition battery (7.4 volt/ 2600mah)
•
2 x voltage regulator
•
2 x switches with charge jacks
Tools
:
ITEMS NEEDED TO COMPLETE
•
Allen wrenches US and Metric.
•
Dremel cutting disc and sanding drum tool
•
Electric drill and selection of bits
•
Razor saw
•
Flat head screwdriver
•
Hobby heat gun
•
Hobby iron and covering sock
•
Masking tape
•
Modeling knife
•
Needle nose pliers or crimping tool
•
Paper towels
•
Pen, pencil or felt tipped marker
•
Phillips screwdriver
•
Rubbing alcohol
•
Ruler and tape measure
•
Scissors
•
T pins
•
Waxed paper
•
Wire Cutters
Adhesives
:
•
15-30 Minute epoxy
•
Blue Loctite
•
Epoxy mixing cups, mixing sticks, brushes
•
CA kicker (optional)
•
Thick, Thin and Medium CA
•
Rubbing alcohol
•
Wipes
WARNING
Some rubbing alcohols
may attack painted parts.
8