Safety Precautions - Max-Thrust RIOT Assembly And Instruction Manual

Warning:
This radio controlled model is not a toy. It requires skill to fly and is not recommended for use by
beginners without assistance from an experienced model pilot. It should not be operated by
children without the supervision of a suitably experienced adult.
Max-Thrust reserves the right to modify the specification of this model at any time.

Safety Precautions

1. Do not attempt to repair or modify this aircraft with non-factory parts.
2. Never fly this model over roads, railway lines, near to power lines, airports, do not fly this model in
excessively strong winds, in the rain, or thunderstorms.
3. Do not fly or launch the model towards people.
4. Keep hands and face away from rotating propeller at all times.
5. We strongly recommend that all fixings and fasteners used in the construction of this model are
checked regularly for integrity. Failure to do so could cause a crash, injury to yourself or others
around you.
6. We only recommend the use of 2.4GHz radio equipment with this model
Disclaimer
1. This radio controlled model is not a toy. Used incorrectly it is capable of inflicting serious injury to
persons or damage to property. The owner/pilot assumes all responsibility for any damage to persons
or property resulting from the use of this product.
2. The manufacturer and distributor decline all responsibility for any liability arising from use of this
product.
3. It is very important that you follow all instructions for assembling and setting up of this model.
Failure to do so could result in a loss of control and possibly a crash.
"EPOFLEXY"
"EPOFLEXY" is a very tough and durable material perfect for the manufacture of model aircraft. When
using screwed fixings with "EPOFLEXY" components it is important to tighten the screws sufficiently to
provide a firm fixing.
Excess tightening could result in the foam material becoming compressed, possibly damaging or
distorting the part. Take care to ensure that all screws are tightened sufficiently to provide a firm fixing,
but do-not over tighten. We recommend that all fixings are checked regularly for security and safety
purposes.
2
.
© Copyright Century UK Limited 2012 www.centuryuk.com