6-26.Face Plate And Thread Take-Up Cover - Brother S-710A Service Manual

(2)
6-26. Face plate and thread take-up cover
(2)
(1)
(2)
<DD7100A, 710A>
<DD7100>
1799M
(4)
(3)
(5)
1800M
(6)
(8)
(7)
(8)
(6)
(7)
1801M
SL-710A
4. Pass the cord (2) of the operation panel (1) under the
arm as shown in the illustration.
1. Install the face plate (1) to the arm with the three
screws (2).
2. Install the thread take-up cover (3) to the arm with the
screw (4).
3. Install the needle (5).
4. Pass the thread wiper cord (6) under the arm as
shown in the illustration.
5. Secure the thread wiper cord (6) together with the
reverse actuator cord (7) using the cord holder (8).
6. ASSEMBLY
56