6. ASSEMBLY
6-27. Safety switch
6-28. Arm cover, rear cover and bobbin winder tension assembly
(6)
(4)
(3)
6-29. Other devices
Refer to the Instruction Manual for details on installing other devices.
57
1. Tilt back the machine head.
(3)
2. Install the safety switch (1) to the bed with the washer
(2)
(2) and screw (3).
(1)
1802M
1. Install the arm cover (1) to the arm with the four
screws (2).
2. Install the rear cover (3) to the arm with the seven
(5)
screws (4).
(2)
3. Insert the bobbin wider tension (5) into the mounting
hole so that it faces as shown in the illustration, and
(1)
then secure it with the set screw (6).
1803M
SL-710A