Pair A Mobile Device With M400; Delete A Pairing - Polar Electro M400 User Manual

1. Wear your heart rate sensor, and press START in time view to enter pre-training mode.
2. To pair, touch your sensor with M400
wait for it to be found.
3. M400 lists the heart rate sensors it finds.The device ID, for example,
played. Choose the heart rate sensor you want to pair and then choose Yes.
4. Pairing completed
or
1. Go to General Settings > Pair and sync > Pair new device
2. M400 starts searching for your heart rate sensor.
3. Once the heart rate sensor is found, the device ID, for example,
played. Choose the heart rate sensor you want to pair.
4. Press START,
5. Pairing completed

PAIR A MOBILE DEVICE WITH M400

Before pairing a mobile device, create a Polar account if you do not already have one, and download Flow app
from the App Store. Make sure you have also downloaded and installed FlowSync software onto your com-
puter from flow.polar.com/start, and registered your M400 in the Flow web service.
Before trying to pair, make sure your mobile device has Bluetooth turned on, and airplane mode/flight mode is
not turned on.
To pair a mobile device:
1. On your mobile device, open Flow app and sign in with your Polar account.
2. Wait for the Connect product view to appear on your mobile device (Waiting for M400) is displayed.
3. In M400, go to Settings > General settings > Pair and sync > Pair new device
4. Once your device is found, the device ID
5. Press START,
6. Accept the Bluetooth pairing request on your mobile device and type in the pin code shown on your
M400.
7. Pairing completed

DELETE A PAIRING

To delete a pairing with a sensor or mobile device:
is shown when you are done.
Pairing is displayed.
is displayed when you are done.
Connecting to device
is displayed when you are done.
is displayed, touch your heart rate sensor with M400, and
Polar mobile xxxxxxxx
is displayed, followed by
17
Pair Polar H7 xxxxxxxx, is dis-
and press START.
Pair Polar H7 xxxxxxxx, is dis-
and press START
is displayed on M400.
Connecting to app.