Table of Contents
Advertisement
5
Using the handle, gently pull the card from the enclosure.
6
Note the position of the jumpers and the switch settings on the faulty card.
7
Remove the new replacement SAF-TE Disk I/O card from the shipping
container and inspect for obvious damage. Save the packaging materials.
8
Set the jumpers and switches to match the faulty card being replaced.
9
Insert the replacement card by aligning it into the rail guides and pushing
the card until it fully seats.
10
Tighten the two thumbscrews. Do not overtighten the screws.
11
Re-connect the SCSI data cables to the replacement SAF-TE Disk I/O card.
12
Turn on the enclosure. For more information, see "Turning on the
enclosure" on page 29.
13
Using the packaging materials from the replacement card, repackage the
failed card and return it per your return instructions.
www.gateway.com
Replacing the SAF-TE Disk I/O card
71
Advertisement
Table of Contents
