Converting To A Dual-Backplane Device - Gateway 850 User Manual

Chapter 1: About the Gateway 850 SCSI Storage Enclosure

Converting to a dual-backplane device

You can convert the enclosure to a dual-backplane device by removing the
single bus module.
To convert the enclosure into a dual-backplane device:
1
Turn off the enclosure. For instructions, see "Turning off the enclosure"
on page 29.
2
Remove the controller cover plate.
3
Remove the single bus module from the Controller 1 slot.
4
Reinstall the cover plate.
6
Cover Plate
www.gateway.com
Single-Bus
Module