Table of Contents
Advertisement
Chapter 3: Monitoring Systems
4
Verify the communication parameters are as follows:
5
At the cursor, press C
The Enclosure Terminal Utility menu appears.
6
Press the 5 key to select option
42
9600 Baud (optional 19,200)
Baud rate set by Switch 6 – up for 19,200 and down for 9,600 (verify
the setting by pressing the Alarm Reset button and noting the
condition of the Drive Status LED for Drive slot 5).
8 Data bits
1 Stop bit
None (parity)
Flow Control Off
TRL
www.gateway.com
+E.
5) Firmware Upload
.
Advertisement
Table of Contents
