Table of Contents
Advertisement
Chapter 4: Troubleshooting
Host SCSI channel problems
Symptom
The host SCSI BIOS scan
hangs.
Device SCSI channel problems
Problem
Not all drives connected to
the controller device
channels are displayed
during boot, or the controller
hangs during display of
connected drives.
52
Solution
Check that termination is set correctly in the
Configuration Menu and the drive enclosure. Check
that the device ID set in the software does not conflict
with any other devices on the host SCSI channel. If
you have a long SCSI cable, try a different or shorter
cable.
Solution
See "Setup and Installation" on page 13 to be sure
that the enclosure is correctly configured. Check
termination and ID assignment. If you have enabled
Ultra/Ultra2 SCSI on any device channels, try
disabling it.
www.gateway.com
Advertisement
Table of Contents
