Table of Contents
Advertisement
4
Verify the communication parameters are as follows:
9600 Baud (optional 19,200)
Baud rate set by Switch 6 – up for 19,200 and down for 9,600 (verify
the setting by pressing the Alarm Reset button and noting the
condition of the Drive Status LED for Drive slot 5).
8 Data bits
1 Stop bit
None (parity)
Flow Control Off
5
At the screen cursor, press C
appears.
6
Press the 1 key to select option
Enclosure monitoring using VT-100 emulation
+E. The Enclosure Terminal Utility menu
TRL
1) Show Enclosure Environment Status
www.gateway.com
.
39
Advertisement
Table of Contents
