Table of Contents
Advertisement
VTrak J300s Product Manual
LEDs
Power
System Off Normal
FRU*
System Off Normal
I/O Module
No Activity
1 or 2
Heartbeat
System Off
* Field Replacement Unit: Cooling Unit (CU) or Power Supply Unit (PSU)
** Blinks intermittently.
Drive Status Indicators
After a few moments the Power/Activity should display Green.
If there is no disk drive in the carrier, the Disk Status LED and the Power/Activity
LED will remain dark.
Figure 2. VTrak J300s disk carrier LEDs
The VTrak spins up the disk drives sequentially in order to equalize power draw
during start-up. After a few moments the Power/Activity and Disk Status LEDs
should display green.
If you have SATA disk drives installed without an AAMUX adapter (see page 11),
the Power/Activity LED behavior depends on the specific disk drive.
The Disk Status LED behavior depends on your HBA or RAID controller. See the
table below.
Steady
Dark
Green
State
Flashing
Amber
Green
1 CU and/or
1 PSU failed
Activity
Normal**
24
Red
2 CU and/or
2 PSU failed
Disk Status
Power/Activity
Advertisement
Table of Contents
