Selecting A Seam Program - Pfaff 3586-2/02 Instruction Manual

9

Selecting a seam program

.07
Switch on the machine and select INPUT mode.
100
1 2 3 4 5 6 7
Using the Program number selection (number key 1) or Sequence number selection
(number key 2) function, select the required menu.
1 0
bis Using the number keys select a previously entered seam program.
Enter
Complete selection with Enter.
Depending on the setting and configuration of the machine, in particular the
status bar may differ from the following example.
100 50.5
8 9 0
Seam programs can be transferred from a disk to the machine memory. To do
so the READ / WRITE PROGRAM function must be selected (see Chapter
11.05 Functions in INPUT mode).
The CREATE/MODIFY PROGRAM function (see Chapter 11.05 Functions in
INPUT mode) is used to create a seam program on the graphics control panel.
5000
Esc
Clear
Enter
Preparation
9 - 6