Pfaff 3586-2/02 Instruction Manual page 60

Input
3
11 - 20
PLEAT 1
With this function the corresponding seam type can be programmed.
Program numbers 300 - 399 are allocated to the seam type "Pleat 1".
2
1: 10.0 2: 40
3: 20.0 5: 0
3
1
+
4
-
5
1 2 3 4 5 6 7
Number key 1
1
Press this number key to enter the value for pleat depth.
Number key 2
2
Press this number key to enter the value for pleat length.
Number key 3
3
Press this number key to enter the value for depth at hip.
Number key 4
4
Press this number key to enter the value for curve.
Number key 5
5
Press this key to enter the value for shifting the starting point.
Starttack / stitch condensing seam start (number key 8)
With this function it is possible to define the type of seam starttack. By pressing a
key it is possible to select either a tack or stitch condensation at the beginning of
the seam.
End tack / Stitch condensing seam end (number key 9)
With this function it is possible to define the type of seam end tack. By pressing a
key it is possible to select either a tack or stitch condensation at the end of the
seam.
Basting stitch (number key 0)
With this function it is possible to attach a basting stitch.
(The symbol for the currently selected type of basting stitch is always displayed).
2
1
1 2 3 4 5 6 7
:
300 2.2
4: +0
8 9 0
:
300 2.2
1: 50 2: 140
8 9 0
Esc
Clear
Enter
Esc
Clear
Enter