Pfaff 3586-2/02 Instruction Manual page 79

INTERMITTENT FEED
1
It is possible to enter a sector, where the carriage feed is intermittent.
REDUCED SPEED
2
It is possible to enter a sector, where sewing takes place at a reduced speed. The
reduced speed value is selected on the machine, see Chapter 11.05 Functions in the
INPUT mode.
SPEED
3
A fixed speed is entered in the program.
PROGRAMMABLE OUTPUTS
4
Via a menu a choice of outputs can be selected.
OUTPUT 1
1
OUTPUT 2
2
SEAM INTERRUPTIONS
5
The program procedure is interrupted. If this function is selected, a menu is displayed,
where the type of interruption can be selected.
WAIT FOR INPUT 1
1
The program procedure is interrupted until the input has reached the appropriate
level.
2
WAIT FOR INPUT 2
PROGRAMMED STOP
3
A stop has been programmed in the program.
By calling up the Start function, the procedure is continued.
WAIT FOR TIME
4
The program procedure is stopped until the programmed time has elapsed.
Deactivate Insert (number key 0)
This function is used for switching between Insert and Initial state mode. . . . .
When this function is switched on (symbol is shown on a dark background) Insert is
activated.
The CREATE/MODIFY PROGRAM function can be ended at any time by
activating the operational mode keys (INPUT/SEW)
Input
11 - 39