Download  Print this page

Before Operation - Sanyo DC-X850 Instruction Manual

Hide thumbs

Advertisement

BEFORE OPERATION
Turning
the power
on and
off
Press the POWER button. The display and function indicator light. The
STANDBY indicator goes out.
To turn off the power, press the POWER button again. The STANDBY
indicator lights.
-
When the mains lead is connected to the AC outlet, the STANDBY
indicator lights and the unit will respond to commands from the remote
control.
Selecting
the function
Press the desired
function
button
(TAPE,
CD, TUNER
or PHONO/
VIDEO).
-
When the function is changed from "CD to another, CD play stops
automatically.
Adjusting the volume
Turn the VOLUME control to UP or DOWN, or press "+" or "-" VOLUME
button on the remote control.
Volume position indicators
The volume position indicators show the relative volume position.
Adjusting
the
Ieft/right
speaker
balance
Use the BALANCE
control to adjust the Ieftkight speaker balance.
Bass
expander
system
Press the BASSXPANDER
button to ON to enhance the bass sound.
Adjusting
the
sound
quality
The GRAPHIC
EQUALIZER
controls
(100Hz/1 kHz/1 OkHz) allow the
sound to be tailored to individual musical preferences or to fit the acoustics
of the room. Moving the control will adjust the sound level in a narrow range
of musical frequencies.
~
If the operation
of the unit or display is not normal or when all the
memory contents are to be cleared dlsconnectthe
reams lead from the
AC outlet, then turn the VOLUME control to DOWN and hold it for 30
CD PLAY
Use compact
discs bearing
the symbol shown below. In addition
to
conventional
12 cm CDs, this system can be used to play 8 cm CDs without
an adapter.
@llIIE
DIGITAL
AUDIO
1,
2.
3.
4.
5.
6.
Press the CD function button, or the CD button on the remote control.
"00:00 00 appears on the display. After several seconds, "00:0000
is replaced by "dISC'.
Press the OPEN/CLOSE
button.
appears on the display.
Place the disc on the disc tray.
The disc tray slides out and "00
For 12 cm CD
For 8 cm CD
Hold the disc only by the centre and edges, then carefully place it with
the label facing upon the centre of the disc tray.
Press the OPEN/CLOSE
button again to close the disc tray.
The total play time and total number
of tracks on the disc
displayed.
Press the PLAY/PAUSE
button. Plav starts from the first track.
I
00:01
'M'
01
I
The elapsed play time and track number for the current track
displayed.
are
are
If you press the PLAY/PAUSE
button while the tray is still open,
it will close, and play will begin automatically.
Press the STOP button to end disc play.
The total play-time and total number of tracks are displayed.
When the last track has been played, the player stops automatically.
When the OPEN/CLOSE
button is pressed during play, play will stop
and the disc tray will slide out.
Notes on
handling
compact discs
Do not expose the disc to direct sunlight,
temperatures
for extended periods of time.
high humidity
or high
Discs should be returned to their cases after use.
Do not apply paper or write anything on the disc surface.
Handle the disc by its edge. Do not touch the playing surface (glossy
side).
Fingerprints and dust should be carefully wiped off the playing surface
of the disc with a soft cloth.
Wipe in a straight motion from the centre to the outside of the disc.
Never use chemicals
such as record cleaning
sprays, antistatic
sprays or fluids, benzene or thinner to clean compact discs.
Temporarily
stopping
play
Press the PLAY/PAUSE
button. The time display blinks on the display. To
resume play, press the button again.
Direct track selection
By using the remote control, play can be started immediately
from the
desired track. While a disc is playing, it is possible to switch immediately
to a particular track.
Select "CD" function first.
Example:
To start from track 3 on the disc, press the 3 button.
To starl from track 10, press +1 O, then O.
To start from track 25, press +1 O twice, then 5.
When selecting track 10-99, press the next number button within
5 seconds.
-
This operation will not function during programmed
play.
If a non-existent track number on a disc is selected, play will begin with
the last track on this disc.
If a non-existent
track number on a disc is selected during play, play
continues with the current track.
-
When using the controls on the main unit, press the E>/
FW or
K</<<
button to select the track, then press the PLAY/PAUSE
button.
-6-

Advertisement

loading

  Also See for Sanyo DC-X850

  Related Manuals for Sanyo DC-X850