Configuring Aux Settings; Switching The Video - Sony AWS-750 Operating Instructions Manual

Configuring AUX Settings

Configuring [Clean] settings
To output an AUX signal that consists of the PGM output
with titles and logos removed, select [Clean] in the
[AUX] list. You can specify which signals to remove
from the output under [AUX Clean].
Settings are configured in the [System Setup] screen.
1
Display the [System Setup] screen, and tap [Others].
The [Others] screen appears.
2
Tap [AUX], and select whether to include [Title 1],
[Title 2], [Logo 1], and [Logo 2] in the clean video
under [AUX Clean].
Select [On] to include an item, and select [Off] to
exclude it.
Outputting AUX from the PGM/AUX output
connectors
Specify the connectors (RGB output, HDMI output, or
SDI output connectors) you want to use for AUX output
as [AUX].
1
Display the [System Setup] screen, and tap [Video].
The [Video Setup] screen appears.
2
Tap [Output] in the menu to the left, select the
connector you want to use for AUX output in the
screen that appears, and select [AUX] for [Video
Source].

Switching the Video

Creating [AUX] lists
Create a list by adding input signals and still images to the
[AUX] option list.
For details on creation, see "Creating Lists" (page 39).
Tip
[PGM] and [Clean] cannot be removed from the [AUX]
list.
Switching videos
1
In the [AUX] list of the [Option] menu, select the
select the material you want to use for the AUX
output.
Switching the Second Output (AUX)
71