Table of Contents
Advertisement
Step 2: Turning the Unit
On
Turning the unit on
1
Connect the DC output plug of the supplied AC
adapter to the DC IN 19.5V connector on the rear of
the unit, and connect the AC adapter to a power
supply.
2
Open the display on the unit.
For details, see "Opening and Closing the Main
Display" (page 18).
3
Press the 1 switch on the left side of the unit.
When power is supplied, the power indicator on the
front left side of the unit lights green, and the unit
starts up.
Lights
The startup screen appears.
When startup is complete, the main screen and sub
screen appear, and you can perform operations.
Main screen
If video is being input from cameras or
other devices, the video will appear
immediately.
Note
This unit is designed to be used with the main display
in its upright position. Do not perform operations
with the main display closed.
Turning the unit off
Press the 1 switch on the left side of the unit.
A confirmation message appears.
The current conditions are saved before the unit shuts
down and turns off. (The power indicator will turn off.)
Note
If you want to turn the unit on again after turning it off,
wait at least 5 seconds before pressing the power switch
again.
25
Step 2: Turning the Unit On
Advertisement
Table of Contents
