Rear; Audio Input Block - Sony AWS-750 Operating Instructions Manual

Live content producer
Table of Contents

Advertisement

Rear

Cable clamp
a DC IN 19.5V (DC power input) connector
Connect the supplied AC adapter here.
Be sure to use the nearby cable clamp to prevent the
cable from disconnecting.
The AC adapter does not include an AC power cord.
For details on the AC power cord, see "Optional
accessories" (page 107).
b VISCA connector (RS-422, 5-pin)
When you want to control a VISCA-compatible
camera from this unit, connect the VISCA cable here
(page 93).
For details on pin assignments on the connector, see
"VISCA connector" (page 113).
c GPI connector
Connect this to the TALLY connector of a camera
control unit (CCU) or similar device.
This allows you to light the tally lamps on the
cameras being used as the PGM output and NEXT
selection sources.
For details on settings, see "Using the GUI Tally
Function" (page 51).
For details on pin assignments on the connector, see
"GPI connector" (page 113).
d REF OUT (reference signal output) connector
(BNC type)
Outputs black burst (BB) signals.
e
(ground) connector
Connect the system grounding conductor here.
f Panel cover attachment points
1 AUDIO INPUT
block
2 AUDIO OUTPUT
block
4 VIDEO OUTPUT
block
Cable clamp
Attach the hooks of the panel cover here (page 18).
g Anti-theft wire slot
When you want to attach a commercially available
anti-theft wire to the unit, attach it to this slot
1
(3 × 7 mm (
/
in. ×
8
h Ventilation holes
Do not block the ventilation holes. Doing so may
cause internal overheating, resulting in fire or damage
to the unit.

1 AUDIO INPUT block

a LINE IN connectors 5 and 6 (pin jacks)
Input analog audio signals from audio devices.
b MIC/LINE IN connectors 1, 2, 3, and 4 (balanced
XLR 3-pin / TRS combo)
Input analog audio signals from microphones and
audio devices.
c +48V switches
Use these when microphones that support external
power supplies are connected to MIC/LINE IN
connectors 1 to 4. When set to ON, the indicators
light and +48V power is supplied from the unit.
3 VIDEO INPUT
block
Cable clamp
9
/
in.)).
32
Parts Identification
15

Advertisement

Table of Contents
loading

Table of Contents