Sony AWS-750 Operating Instructions Manual page 94

Cameras for which remote control is enabled
appear as "address (model name)."
Tip
When a remote camera that is not supported by the unit is
connected, its model name will appear as "Unknown."
Some functions will not be available in such cases.
Linking the power control of the unit and
remote cameras
You can link the power control of the unit (power on/off)
to the power control of the remote cameras.
1
Display the [System Setup] screen in the sub screen,
and tap [Others].
2
Tap [Remote Camera] to display the [Remote
Camera] screen.
3
To link power control, select [Enable] for [Auto
Power Control].
Resetting remote cameras
Reset the remote cameras to default settings using the
following methods when you want to reconnect remote
cameras.
• Tap [Reset Camera] in the [Remote Camera] screen
94
Remote Camera Connections and Settings
• Display the [Camera] context menu in the [Option]
menu, and select [Reset Camera]
When the reset the cameras, connection will be
reestablished for all cameras connected for remote
control. Depending on the camera model, the pan and tilt
may return to their default positions.